The Leica Biosystems Process and Solutions Optimization team has partnered with a large province-based hospital to review the impact of automating their Routine Staining area. This hospital is most interested in the benefits they could realize in reducing their current hands-on intensive process and improving the throughput of their H&E staining.

During the Optimization Assessment, the Process and Solutions Optimization team observed the current processes involved in routine staining over several days. The team was able to benchmark the current processing time and number of steps involved.

It was observed that the staff is required to transfer the racks of slides through several steps in their process mainly due to the older instrumentation being used to perform routine staining. As a result, the workflow has been designed to transfer racks of slides to and from the oven, to and from the stainer, to and from the coverslipper, and to and from a vented hood for slide drying. Due to the high amount of hands-on time required, the lab only operates the routine staining for 10 hours each day.

Fig1 : 67% reduction in hands-on time

Through Analyzing the data, the Process and Solutions Optimization team was able to show that by replacing the current Leica ST4040 Linear Staining System with detached coverslippers with two HistoCore SPECTRA Workstations, this academic medical facility could realize a 45.4% reduction in hands-on time. Further analysis showed that by modifying their current workflow, another 21.6% reduction could be achieved.

Fig 2: shows the number of hands-on minutes that are spent each day performing routine staining with the current processes.

By combining integrated solutions and optimizing efficiencies, this facility could reach an overall 67% reduction of hands-on time for routine staining. Because of the reduction of hands-on time required, they could increase the hours of operation of routine staining to 16 hours each day, which is the total number of staffed hours for the laboratory. These changes would help increase the laboratory’s capacity and reduce their turn-around-time for delivering slides to their Pathologists.

Fig 3: shows a 67% reduction in hands-on minutes that would be required each day
performing routine staining with the recommended changes.

Instruments used in this case study

HistoCore SPECTRA ワークステーション

This reference document is presented as a service to health care professionals by Leica Biosystems and has been compiled from available literature. Although every effort has been made to report faithfully the information, Leica Biosystems cannot be held responsible for the correctness. This document is not intended to be, and should not be construed as medical advice. For any use, the product information guides, inserts and operation manuals of the various drugs and devices should be consulted. Leica Biosystems and the editors disclaim any liability arising directly or indirectly from the use of drugs, devices, techniques or procedures described in this reference document.