Skip to main content

Optimizing Anatomical Pathology Through Implementation of Specimen Tracking

The Leica Biosystems Process and Solutions Optimization team has partnered with a major academic medical center to examine ways to further optimize their anatomic pathology lab and equipment. This laboratory was primarily interested in the impact that specimen tracking can have on increasing efficiency and patient safety.

The Leica Biosystems team presented a total solution that included BOND–III Fully Automated  IHC  and  ISH  Stainer, HistoCore PELORIS 3 Premium Tissue Processing System and CEREBRO Specimen Tracking System. The solution was designed to help them achieve their goals of patient safety and efficiency, while becoming a leader in anatomic pathology through technology and process improvement.

Figure 1 (above): Time Savings with CEREBRO

As part of comprehensive workflow assessment, the team gathered the data displayed in the table. By analyzing the data, we can demonstrate the following potential impacts:

  • Elimination of 6 paper logs
  • Elimination of 12 total steps in the process
  • A time savings of approximately 1040 hours/year
  • 28% increase in blocks per hour (61 without specimen tracking to 78.3 with specimen tracking).

By eliminating these tasks, this laboratory can continue to improve on their goal of becoming a technological leader in anatomic pathology, while reducing risk, improving quality, integrating solutions, and optimizing efficiency using the CEREBRO specimen tracking solution.

Projections and Realized Results are specific to the institution where they were obtained and may not reflect the results achievable at other institutions.

Leica Biosystems content is subject to the Leica Biosystems website terms of use, available at: Legal Notice. The content, including webinars, training presentations and related materials is intended to provide general information regarding particular subjects of interest to health care professionals and is not intended to be, and should not be construed as, medical, regulatory or legal advice. The views and opinions expressed in any third-party content reflect the personal views and opinions of the speaker(s)/author(s) and do not necessarily represent or reflect the views or opinions of Leica Biosystems, its employees or agents. Any links contained in the content which provides access to third party resources or content is provided for convenience only.

For the use of any product, the applicable product documentation, including information guides, inserts and operation manuals should be consulted.

Copyright © 2024 Leica Biosystems division of Leica Microsystems, Inc. and its Leica Biosystems affiliates. All rights reserved. LEICA and the Leica Logo are registered trademarks of Leica Microsystems IR GmbH.