Menu

ThermoBrite Elite

3800-007000-001

Just load your slides and walk away. Minimal hands-on time frees up technologists for other important tasks.

The ThermoBrite Elite automates and standardizes FISH slide preparation including deparaffinization, pretreatment, denaturation/hybridization, and post hybridization wash. Application of probe, counterstain, and coverslips are the only manual steps.

The included intuitive and user-friendly software enables users to run preloaded protocols for FFPE tissue specimens or to create up to 100 user-defined protocols. The instrument, as it is an open platform, can be programmed to work with nearly any probe or protocol, allowing the selection of up to 10 input reagents and 3 separate waste paths. The ThermoBrite Elite hybridizes with controlled, accurate temperature and can process up to 12 slides per run with the ability to adapt to smaller batches. For higher throughput, transfer slides to a standard ThermoBrite instrument to denature/hybridize and continue using your ThermoBrite Elite for new runs.

For in vitro diagnostic use only.

Features

Product Features

Efficiency

  • Hands-on time reduced to 3 steps from more than 30
  • Frees up technologists for other tasks
  • Automated fluidic system

Reliability

  • Accurate hybridization temperature control
  • Average hybridization efficiency higher than 98%*
  • Validated on FFPE tissue*

Flexibility

  • Flexible system: Open system with preloaded protocols and the ability to create custom protocols (possibility to use up to 100 custom-made protocols)

Convenience

  • Fast setup and start of protocol
  • User friendly software
  • Small bench top unit

*based on internal validation data

Specs

Product Specifications

PART NUMBER IVD 3800-007000-001
SLIDE-BASED APPLICATIONS FFPE tissue
INSTRUMENT FLUIDICS Input Fluidics
Output Fluidics
Compatibility: 10 reagents, 3 wastes, Common ISH/FISH reagents
DIMENSIONS & WEIGHT Width: 62.2 cm 24.5"
Height: 38.1 cm 15"
Depth: 39.4 cm 15.5"
Weight: ~27 kg ~60 lbs
TEMPERATURE Control Range 25° C - 95° C 77° - 203° F
Operating 15 - 40° C 59 - 104° F Relative humidity: max. 80% < 31° C (87.8° F), max. 50% at 31 - 40° C (87.7 - 104° F)
USER INTERFACE AND CONTROL PC-based GUI Continuous data logging
SAFETY & REGULATORY ETL, CSA, CE
POWER REQUIREMENTS 100-240 VAC, 50/60 Hz, 10A

Parts/Accessories

Parts/Accessories

3801-011005-001    KIT PERIODICAL MAINTENANCE, TBE
3801-010021-001    12 PACK, PERI-TUBING KIT, FLURAN
3800-010022-001    KIT PERI-TUBE, FLURAN, 2 TUBES
3801-007900-001    INLET FLOW METER SERVICE KIT
3800-007744-001    "ASSY KIT, SLIDE CARRIER" QTY 6
3801-007900-001    INLET FLOW METER SERVICE KIT
3801-007915-001    OUTLET FLOW METER SERVICE KIT

Documentos

Documentos