The HistoCore Arcadia C is a cold plate holding up to 65 cassettes on its large working surface. Cooling efficiency is important, so the cold plate was designed with an environment adaptive control module to make sure the operating temperature is stabilized at -6°C.
The Arcadia C cold plate can be used as a stand-alone unit for re-cooling blocks prior to sectioning or as part of an embedding center to cool molds after paraffin dispensing.
The HistoCore Arcadia modular tissue embedding system incorporates two independent products, the Arcadia H heated embedding module and the Arcadia C cold plate. This gives you the flexibility to arrange the embedding workflow in the direction that accommodates your laboratory needs.
The easy-to-load large capacity plate can hold up to 65 cassettes.
Easy to clean metal working surface with less adhesion. The sturdy design of the special scraper helps cleaning the working surface.
| Dimensions (D x W x H): | 636 mm x 400 mm x 384 mm |
| Weight: | 32 kg |
| Operating temperatures: | -6°C (self-regulating) |
| Maximum Power Consumption: | 100 VA |
| Min. guaranteed workload capacity: | 65 blocks solidified in 30 minutes |
| Environmental operating temperature: | 20°C to +30 °C |
| Power supply: | 100V/110 - 120V AC/220 - 240 V AC, 50/60 Hz |
| Power consumption: | 400 VA max |
HistoCore Arcadia Embedding System - EN (95.13314 Rev D)
Size: 6.23 MB,
Type: pdf
EU Declaration HistoCore Arcadia C B en
Size: 963.35 KB,
Type: pdf
